Additional Information:
IT-1084 is designed to provide thin layered coating onto the printed circuits or other electronic substrates to protect and significantly extend the life of the components and circuitry against environmental and mechanical damages.
The coatings protect electronic printed circuit boards from moisture and contaminants, preventing short circuits and corrosion of conductors and solder joints.Additional Information:
IT-1105 is a zinc based bright cold galvanizing spray to prevent rust and corrosion on all types of metals for up to two years.
This can also be used as a primer over rusted metal to repair hot dip galvanizing. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold. Glossy finish helps the coating to blend well with the hot dip galvanized parts and hence used extensively for repair & maintenance.
Additional Information:
Product Details:
Usage | Industrial |
Brand : CrossNet Products Privet Limited
IT-1083 Adherent, colorless belt dressing spray. It stops squeaks & gives an instant grip. Its no-stick formula helps preserve belts and it is designed to meet belt manufacturers' guidelines for all flat-ribbed and V-belts.
The product contains no chlorinated solvents or CFC's
Additional Information:
Additional Information:
IT-1087 is a fast evaporating cleaner spray for removal of baked-on grease oils and grime for electromechanical assemblies and for a broad range of other equipment and parts.
Residue free, the easy to use aerosol removes carbon, grease, oils and varnish with a penetrating formulation that is safe on sensitive metals.Additional Information:
IT-1088 is a flexible coating specially formulated for use on electrical equipment. It protects against moisture and corrosion. It possesses high arc-resistance and insulating properties. It is successfully used in applications that range from class 105 to 220. The product penetrates thoroughly and forms a tough, flexible film which has a high arc resistance and non-tracking properties. The coating resists oil, water, acids and alkalis & has an excellent adhesion.
It is oil resistant & can be thinned with low cost solvents. The coating is used for motor, stator, coil and transformer impregnation. controller shafts, finger blocks, switch bases, and other electrical insulation, switch parts (porcelain molded compound, etc.) It is also used for field coils, windings and machine frames, inside motor frames, commutator parts, collector rings, enameled wire coils. For sealing oil lines, air lines, threaded pipe joints, transformer drain taps, gaskets, etc.
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1091 is a wet, thin-film thixotropic coating designed for protection of the finely machined metal surfaces such as tools, dies, molds, including plastic injection molds, spare parts, machines etc. against corrosion during storage and transport.
This coating also protects under tropical climate and marine conditions. Product features include its ease of application removal. The film deposited is thin coating which is removable and also lubricating. It is ideal for components where markings must remain visible or those where coated parts are to be welded or assembled directly without any preparation. Traditionally used for preservation of the plastic injection molds, some of its other applications include its use for protection of engineering components exposed to high corrosive loading, e.g. outdoor weathering under roofs of semi-finished products, finished products etc. up to 2 years.
It is an excellent choice for use on shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions. After application, it forms a transparent, oily protective film that will not run off and also adheres well to vertical surfaces.
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1094/1 is a multifunctional fluid designed as a maintenance aid. The product helps loosen rust, dismantle corroded & seized threaded connections. It displaces moisture and therefore is used for restoring wet electrical contacts. It provides mild lubrication and protects against corrosion. A low viscosity fluid, it is also often used for short-term corrosion protection esp. for corrosion protection of measuring and cutting tools.
The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaving behind a protective film on the surface which is compatible with common sealing materials. The fluid is used for protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues
Additional Information:
· Item Code: IT-1094
Additional Information:
IT-1094/1 is s multifunctional fluid designed as a maintenance aid. The product helps loosen rust, dismantle corroded & seized threaded connections. It displaces moisture and therefore is used for restoring wet electrical contacts. It provides mild lubrication and protects against corrosion. A low viscosity fluid, it is also often used for short-term corrosion protection esp. for corrosion protection of measuring and cutting tools.
The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaving behind a protective film on the surface which is compatible with common sealing materials. The fluid is used for protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues.
Additional Information:
IT-1095 is designed as a non-staining cleaner/lubricant for modern textile machinery used for various operations such as spinning, winding weaving and knitting etc.
The product is designed using select combinations of cleansing, corrosion protection and lubricating materials. Protects scissors & cutters of splicers / knotters against rust & corrosion and reduces the wear & tear of moving parts.Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1096 is designed to provide long-term, smooth lubricating action under extremes of loads and temperatures - it also helps protect metal parts from rust and corrosion when subjected to humidity and corrosive atmosphere.
The product is based on solid lubricant powders, synthetic oils and various additives for wear protection and efficient lubrication of sideways & cams.
Additional Information:
Product Details:
Automation Grade | CrossNet Products Pvt Ltd. |
IT-1097 is a High temperature synthetic adhesive chain oil spray designed lubrication of the chains and wire ropes exposed to high speeds, water/sea-water contamination.
It gives excellent protection against corrosion & wear. Tack additives prevent the lubricant getting thrown of at high speeds. The lubricant is neutral to ‘O’ rings.
Additional Information:
Product Details:
Automation Grade | CrossNet Products Pvt. Ltd. |
IT-1098 Motorcycles are high-speed applications that operate in tough conditions like rain, dirt, sand, and high shock loads. These specially developed chains are used as the part of the drive train to transmit the motor power to the back wheel. The chain must never be run dry. Lubricating the chain regularly prolongs its life.
IT-1098 is based on synthetic oils containing oil soluble organo-moly compounds. It goes on to wet to penetrate parts deeply, setting up an adhesive lubricating coating that does not fling-off at high speeds. The protective coating set up on the outer of the chains protects against the corrosion and weathering effects.
Additional Information:
Product Details:
Packaging Type | Can |
Brand | CrossNet Products Pvt. Ltd. |
IT-1099 featuring a fast evaporating action without leaving any residues, the product has a deep penetrating action & is suitable to remove grease, dirt, oil and other surface contaminants from sensitive electrical/electronic devices.
It is harmless to plastics and other on-board elastomer/polyimide components.Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1101 is a precision cleaner solvent based on HFC fluid with zero ozone-depletion and a low global warming potential is designed for precision cleaning of the electronic components.
It is ideally suited for cleaning fine particulate matter (submicron range) from metal and nonmetal parts. Typical applications include: as a cleaning and rinsing agent, as drying fluid, for particulate removal or as a dielectric fluid etc. It replaces for many HCFC, PFC, and CFC-113 applications.
Additional Information:
IT-1102 is a zinc rich coating that performs like a hot dip galvanized coating to prevent rust and corrosion on all types of metals for up to two years. It works electro-chemically on all ferrous metals providing rust and corrosion protection indoors and outdoors.
This can also be used as a primer over rusted metal to repair hot dip galvanizing. Specially formulated, it provides a tough flexible coating that will not crack or peel even in extreme heat or coldAdditional Information:
Product Details:
Physical State | CrossNet Products Pvt. Ltd. |
IT-1103 is specially formulated mold release agent that is ideal for all types of plastics. It is designed for quick, clean releases on thermosets as well as thermoplastics.
It allows easy removal of parts from molds and improves surface finish of molded part. IT-1103 is non-staining and odorless and does not contain any ozone depleting chemicals or CFC’s
Additional Information:
Product Details:
Physical State | CrossNet Products Pvt. Ltd. |
IT-1104 is a specially formulated mold release agent that is ideal for all types of plastics when post printing is required after the molding. It does not interfere with the post finishing processes and is designed for quick, clean releases on thermosets as well as thermoplastics. It allows easy removal of parts from molds and improves surface finish of molded part. IT-1104 is non-staining and odor-less and does not contain any ozone depleting chemicals or CFC’s. It prevents sticking & increases life of dies & molds and provides maximum efficiency & economy. It improves product surface finish with fewer rejects & more production. Best use on compression molding gaskets, toy and furniture manufacturing, urethanes, epoxy resins, polyesters, and polystyrenes.
Additional Information:
Mixture of silicone and a cleaner/wiper solvent designed as an anti-stick agent for facilitating cleaning of residues which have accumulated on the spinneret head.
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1200 A assembly paste based on molybdenum disulphide for priming of heavy duty bearings, machine guide-ways, lead screws or other similar applications which are also exposed to heat and load. Used as a lubricant for press-fitting of machine components or as an anti-seize compound for threaded connections exposed to acidic and alkaline atmospheres. The product offers the first basic treatment of metallic sliding surfaces of every kind, in initial and repair assemblies.
It reduces co-efficient of friction, and facilitates “running-in”. Acting against wear, seizing and stick-slip, especially during high load applications, it provides emergency lubrication during start-ups and stops of heavily loaded machines.
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1201 refrigeration spray is designed for quick detection of thermic-disconnections in electronic circuits. The spray can also be used to prevent damage by heat of precious electronic components while soldering adjacent areas. Another common application of this product is its use to facilitate assemblies with shrink-fit.
This can also be used for attaining low temperatures for short durations for material testing. The spray can cool surfaces immediately even down to - 45 ºC depending on the time of spraying. It is neutral to Plastics, rubbers, and other insulating materials. The product leaves no residue, and is completely non-toxic and harmless to metal.
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
Additional Information:
Product Details:
Brand | CrossNet Products Pvt. Ltd. |
IT-1100 is a fast evaporating, non-chlorinated precision cleaner spray for online cleaning of electrical/electronic components.
Examples of applications: for cleaning distribution boards, switches, relays, potentiometers, plug-in connections, sliding and screw contacts & PCB's
Additional Information:
IT-1085 is a dry lubricating bonded coating that is designed for lubrication of the sliding surfaces operating in dirty/dusty atmospheres
It is also used for lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures or as a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements.Additional Information:
IT-1204 A high temperature copper based anti-seize compound in a spray form, the product provides protection against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition.
This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. It performs as an ideal assembly lubricant for threaded connections, especially the ones exposed to high temperatures and vibratory loads.
IT-1204 prevents seizing and sintering of threaded connections at high temperatures and makes dismantling easy even after long hours of operation. The lubricating properties of the compound provide an optimum balance between the tightening torque and he pretension.Additional Information: