Arihant Corporation

IT-1085 Dry Moly Bonded Coating Spray is a dry lubricating bonded coating that is designed for lubrication of the sliding surfaces operating in dirty/dusty atmospheres.

It is also used for lubrication of coarse chains and guide ways operating under high loads and exposed to high temperatures or as a lubricant for highly stressed joints with slow sliding speeds and/or oscillating movements.

IT-1095 Autoconer Spray is designed as a non-staining cleaner/lubricant for modern textile machinery used for various operations such as spinning, winding weaving and knitting etc.

The product is designed using select combinations of cleansing, corrosion protection and lubricating materials. Protects scissors & cutters of splicers / knotters against rust & corrosion and reduces the wear & tear of moving parts.

IT-1200 Assembly Lubricant Spray is a assembly paste based on molybdenum disulphide for priming of heavy duty bearings, machine guide-ways, lead screws or other similar applications which are also exposed to heat and load. Used as a lubricant for press-fitting of machine components or as an anti-seize compound for threaded connections exposed to acidic and alkaline atmospheres. The product offers the first basic treatment of metallic sliding surfaces of every kind, in initial and repair assemblies.

It reduces co-efficient of friction, and facilitates “running-in”. Acting against wear, seizing and stick-slip, especially during high load applications, it provides emergency lubrication during start-ups and stops of heavily loaded machines.
 

Additional Information:

High performance cleaner and degreaser, highly effective and fast evaporating.

 Use:

For residue-free and deep cleansing and degreasing of bearings, machine parts and injection moulds and tools. 

Ideal as degreaser prior to use of industrial glues. For fast and reliable removal at leftovers of oil, resin, wax and soiling.

Eliminates slight paint and condensate residues from the pairing line injection moulds.

Properties:

Evaporates quickly and without residues.

Cleans quickly and efficiently.

Guarantees absolutely clean surfaces.

Significantly better cleaning efficiency. compared to brake cleaners.

Economical in consumption.

Additional Information:

Cavity cleaner and cold paint stripper.

Use:

Removal of diesel effect, plastic and paint residues on metallic surfaces of tools moulds in injection moulding machines, extrusion and film lines.

Removal of all common paints incl. 2K, epoxy, EC and powder coatings.

Removal of sealing residues on screw joints, lids, flanges and engine blocks.

Properties:

Clean application.

Evaporates slowly and almost without residues.

Ideal remover of sealings.

Removes even hardest paints.

Solves brownish diesel residues.

Applicable also with galvanized material, aluminum and aluminum alloys.

Economical in consumption.

IT-1100 Online Contact Cleaner Spray is a fast evaporating, non-chlorinated precision cleaner spray for online cleaning of electrical/electronic components.

Examples of applications:
for cleaning distribution boards, switches, relays, potentiometers, plug-in connections, sliding and screw contacts & PCB's

IT-1105 Anti Corrosion Coating Spray is a zinc based bright cold galvanizing spray to prevent rust and corrosion on all types of metals for up to two years.

This can also be used as a primer over rusted metal to repair hot dip galvanizing. Specially formulated, it provides a tough, flexible coating that will not crack or peel even in extreme heat or cold. Glossy finish helps the coating to blend well with the hot dip galvanized parts and hence used extensively for repair & maintenance.

IT-1088 is a flexible coating specially formulated for use on electrical equipment. It protects against moisture and corrosion. It possesses high arc-resistance and insulating properties. It is successfully used in applications that range from class 105 to 220. The product penetrates thoroughly and forms a tough, flexible film which has a high arc resistance and non-tracking properties. The coating resists oil, water, acids and alkalis & has an excellent adhesion.
 
It is oil resistant & can be thinned with low cost solvents. The coating is used for motor, stator, coil and transformer impregnation. controller shafts, finger blocks, switch bases, and other electrical insulation, switch parts (porcelain molded compound, etc.) It is also used for field coils, windings and machine frames, inside motor frames, commutator parts, collector rings, enameled wire coils. For sealing oil lines, air lines, threaded pipe joints, transformer drain taps, gaskets, etc.

IT-1091 Wet Corrosion Protection Spray is a wet, thin-film thixotropic coating designed for protection of the finely machined metal surfaces such as tools, dies, molds, including plastic injection molds, spare parts, machines etc. against corrosion during storage and transport.

This coating also protects under tropical climate and marine conditions. Product features include its ease of application removal. The film deposited is thin coating which is removable and also lubricating. It is ideal for components where markings must remain visible or those where coated parts are to be welded or assembled directly without any preparation. Traditionally used for preservation of the plastic injection molds, some of its other applications include its use for protection of engineering components exposed to high corrosive loading, e.g. outdoor weathering under roofs of semi-finished products, finished products etc. up to 2 years.

It is an excellent choice for use on shipping protection of packed and unpacked machines and machine parts, apparatuses and equipment goods under extreme climatic conditions. After application, it forms a transparent, oily protective film that will not run off and also adheres well to vertical surfaces.

IT-1096 Textile Cam Lubricant Spray is designed to provide long-term, smooth lubricating action under extremes of loads and temperatures - it also helps protect metal parts from rust and corrosion when subjected to humidity and corrosive atmosphere.

The product is based on solid lubricant powders, synthetic oils and various additives for wear protection and efficient lubrication of sideways & cams.

IT-1097 Adhesive Chain Lubricant Spray is a High temperature synthetic adhesive chain oil spray designed lubrication of the chains and wire ropes exposed to high speeds, water/sea-water contamination.

It gives excellent protection against corrosion & wear. Tack additives prevent the lubricant getting thrown of at high speeds. The lubricant is neutral to ‘O’ rings.

IT-1098 Motorcycle Chain Oil Spray are high-speed applications that operate in tough conditions like rain, dirt, sand, and high shock loads. These specially developed chains are used as the part of the drive train to transmit the motor power to the back wheel. The chain must never be run dry. Lubricating the chain regularly prolongs its life.

IT-1098 is based on synthetic oils containing oil soluble organo-moly compounds. It goes on to wet to penetrate parts deeply, setting up an adhesive lubricating coating that does not fling-off at high speeds. The protective coating set up on the outer of the chains protects against the corrosion and weathering effects.

IT-1099 Off Line Contact Cleaner Spray featuring a fast evaporating action without leaving any residues, the product has a deep penetrating action & is suitable to remove grease, dirt, oil and other surface contaminants from sensitive electrical/electronic devices.

It is harmless to plastics and other on-board elastomer/polyimide components.

IT-1101 Precision Cleaner Solvent Spray For Electronics is a precision cleaner solvent based on HFC fluid with zero ozone-depletion and a low global warming potential is designed for precision cleaning of the electronic components.

It is ideally suited for cleaning fine particulate matter (submicron range) from metal and nonmetal parts. Typical applications include: as a cleaning and rinsing agent, as drying fluid, for particulate removal or as a dielectric fluid etc. It replaces for many HCFC, PFC, and CFC-113 applications.

IT-1103 Silicone Mold Release Spray is specially formulated mold release agent that is ideal for all types of plastics. It is designed for quick, clean releases on thermosets as well as thermoplastics.

It allows easy removal of parts from molds and improves surface finish of molded part. IT-1103 is non-staining and odorless and does not contain any ozone depleting chemicals or CFC’s.

IT-2588 Insulating Varnish Coating Spray is flexible coating specially formulated for use on electrical equipment. It protects against moisture and corrosion. It possesses high arc-resistance and insulating properties. It is successfully used in applications that range from class 105 to 220.

The product penetrates thoroughly and forms a tough, flexible film which has a high arc resistance and non-tracking properties. The coating resists oil, water, acids and alkalis & has an excellent adhesion. It is oil resistant & can be thinned with low cost solvents.

The coating is used for motor, stator, coil and transformer impregnation. Controller shafts, finger blocks, switch bases, and other electrical insulation, switch parts (porcelain molded compound, etc.)

It is also used for field coils, windings and machine frames, inside motor frames, commutator parts, collector rings, enameled wire coils. For sealing oil lines, air lines, threaded pipe joints, transformer drain taps, gaskets, etc

IT-1203 Teflon Li Grease Spray is ideal for heavy-duty applications, the lubricant – also designed for easy dispensing will not melt, freeze, wash off, or break down under high speeds, extreme heat or heavy loads. It provides a clean, white low odor grease in a easy to dispense form which is enhanced with Teflon® fluoropolymer for better water resistance, maximum lubricity, higher temperature stability better boundary lubrication protection. It performs in a wide temperature range of -17°C to 204°C. The lubricant provides a long lasting protection in a broad range of applications conditions reducing friction in metal to metal metal to plastic applications. Common application of the product are its use on open lube points and high load applications including gears and shafts, heavy duty chains, cables, machinery, conveyors, lifting mechanisms, overhead garage doors, axles, bearings, pivots, linkages, cables, fan motors, slides, couplings, automotive hinges, brake parts, latches, springs, coils, pulleys, bolt threads, plumbing fixtures, etc.

Additional Information:

Grease-like anti-corrosion for temporary protection.

Use:

Especially developed for the temporary preservation of injection moulds and tools.

Properties:

Excellent corrosion protection·

Removed completely from injection moulding tools after a few shots·

Extremely water repellent·

Short drying time·

Easy application·

Silicone-free·

Economical in consumption. 

Additional Information:

Grease-like H1 anticorrosive agent for temporary protection.

Use:

Especially developed for the temporary preservation of injection moulds and tools for production of plastic parts for the food industry and medical engineering.

 Properties: 

H1 registered.

Kosher certified.

Halal certified.

Excellent corrosion protection.

Removed completely from injection moulding tools after a few shots.

Extremely water repellent.

Short drying time.

Easy application.

Silicone-free.

Economical in consumption.

IT-1204 Copper Based Anti-Seize Compound Spray is a high temperature copper based anti-seize compound in a spray form, the product provides protection against high temperature seizing and galling. All mated parts, studs, bolts, flanges and gaskets, remove more easily and in cleaner and better condition.

This product can be used on copper, brass, cast iron, steel, all alloys including stainless steel, all plastics and all non-metallic gasketing materials. It performs as an ideal assembly lubricant for threaded connections, especially the ones exposed to high temperatures and vibratory loads.

IT-1204 prevents seizing and sintering of threaded connections at high temperatures and makes dismantling easy even after long hours of operation. The lubricating properties of the compound provide an optimum balance between the tightening torque and he pretension.

IT-1104 Silicone Free Mold Release Spray is a specially formulated mold release agent that is ideal for all types of plastics when post printing is required after the molding. It does not interfere with the post finishing processes and is designed for quick, clean releases on thermosets as well as thermoplastics. It allows easy removal of parts from molds and improves surface finish of molded part.

IT-1104 is non-staining and odor-less and does not contain any ozone depleting chemicals or CFC’s. It prevents sticking & increases life of dies & molds and provides maximum efficiency & economy. It improves product surface finish with fewer rejects & more production. Best use on compression molding gaskets, toy and furniture manufacturing, urethanes, epoxy resins, polyesters, and polystyrenes.

Additional Information:

H1 high-temperature grease with very high wear and corrosion protection.

 Use:

Especially developed for the lubrication of slide and roller bearings, joints, linear guides and other slide surfaces on machines and equipment in the food industry.

For slide and roller bearings at slow speed, slide bars and friction pairings at high temperatures.

 Properties:

H1 registered.

Very high wear and corrosion. protection, high load carrying ability.

Compatible with common plastics, elastomers and paints.

Very good adhesion property.

Highly resistant to cold, hot and salt water.

Resistance to load and shock load.

IT-1090 Dry Waxy Anti Corrosion Coating Spray is a waxy coating designed for protection of the finely machined metal surfaces such as tools, dies, molds, including plastic injection molds, spare parts, machines etc. against corrosion during storage and transport.

This coating also protects under tropical climate and marine conditions. Product features include its ease of application & removal. The film deposited is thin and dry which is also lubricating. It is ideal for components where markings must remain visible or those where coated parts are to be welded or assembled directly without any preparation.

The coating can also be applied over painted surfaces also. The product does not harm rubber and plastics.

Additional Information:

Fully synthetic metal working fluid for demanding operations and for universal machining of ferrous and nonferrous metals.

 Use:

Fully synthetic metalworking fluid for difficult operations and for universal machining of ferrous and nonferrous metals.

 Properties: 

Extremely adherent·

Excellent wetting properties·

Free from heavy metals and their compounds· Mineral oil free·

Contains no chlorine·

Free from phosphor and sulphur·

Very good wear protection·

Economical in consumption.

IT-1094 Penetrant Spray is a multifunctional fluid designed as a maintenance aid. The product helps loosen rust, dismantle corroded & seized threaded connections. It displaces moisture and therefore is used for restoring wet electrical contacts. It provides mild lubrication and protects against corrosion. A low viscosity fluid, it is also often used for short-term corrosion protection esp. for corrosion protection of measuring and cutting tools.
The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaving behind a protective film on the surface which is compatible with common sealing materials. The fluid is used for protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues.
 

IT-1201 Refrigeration Spray is designed for quick detection of thermic-disconnections in electronic circuits. The spray can also be used to prevent damage by heat of precious electronic components while soldering adjacent areas. Another common application of this product is its use to facilitate assemblies with shrink-fit.

This can also be used for attaining low temperatures for short durations for material testing. The spray can cool surfaces immediately even down to - 45 ºC depending on the time of spraying. It is neutral to Plastics, rubbers, and other insulating materials. The product leaves no residue, and is completely non-toxic and harmless to metal.

Additional Information:

General Purpose foam cleaner for glass, plastics, machine parts, carpets, upholstery.

Use:

For general cleaning of machine parts, glass and plastic parts. For gentle cleaning of carpets and upholstery and car interior.

Properties:

Universal in use·

Compatible with common plastics, elastomers and paints·

Cleans quickly and efficiently·

pH-neutral·

Neutral against contact materials·

Economical in consumption.

• Excellent corrosion and rust protection
• Balanced Composition
• Purity

Based on new techniques and modern machines, we are engaged in offering paramount quality Aerosol Silicon Valve Spray. It is used for valves in the chemical industry for lubrication of the pneumatic cylinders & as a lubricant for plastic and rubber components. Under the stern vigilance of our vendors’, the provided grease is processed using quality tested chemical substances and latest methodology as per the predefined industry standards. To meet the variegated demands of clients, we offer this grease in various specifications at market leading prices.

Features:

Purity

Exact composition

Long shelf life