Arihant Corporation

IT-2507 Vanishing Oil for Stamping is a low viscosity, quick evaporating stamping fluid designed for drawing of both ferrous & non-ferrous sheet metal, IT-2507 is applied by a suitable method on the sheet metal just before stamping. After the operation, the residual oil will evaporate at room temperature without leaving any oil traces on the surface of the sheet metal.

Cleaning of the sheets for removal of any oil traces for further operation is not necessary as it evaporates without leaving any traces. This is a ready to use formulation and do not mix with water. The lubricant is used for stamping and drawing of automotive radiator coils, stamping of magnetic steel, embossing and bending or drawing/forming of non-ferrous sheet metal.

It evaporates nearly without residues & no post application cleaning is necessary. It reduces wear & hence extended tool life.

IT-3407 Vacuum Pump Oil are free of impurities & feature improved thermal and oxidation stability and rust inhibition. The oils are stable at higher temperature and & hence longer change over intervals are achievable.

The oils exhibit a minimal breakdown or decomposition under operational conditions & help keep the systems cleaner.

IT-7407 High Vacuum Diffusion Pump Oil is a silicone diffusion pump fluid for high vacuum of upto 10^-9 torr. A low vapor pressure and thermal stability make it ideal vacuum oil for use in mass spectrometers or electron microscopes etc. It offers quick pump-down, even after exposure to air under

Operating conditions.
Low vapor pressure of IT-7407 silicone fluids at baffle temperatures results in low migration rates. Jets and boiler surfaces hence stay clean; it exhibit virtually no breakdown or decomposition under operational conditions. The recovery rate of IT-7407 after exposure to air at operating tempera­tures is faster. The fluid features minimal back-streaming, a longer service life allowing systems keep clean & hence lesser maintenance is required.

Dupont Vertrel Sion Lubricant Oil is a high solvency cleaning agent which is non-flammable and a low environmental impact product for cleaning applications. Typical applications for this product include degreasing, precision cleaning, defluxing, silicone removal, and general solvent cleaning.Opteon™ Sion represents a safe alternative to chlorinated solvents such as HCFC-225, 141b, TCE and nPB, which are currently being phased out due to health and environmental risks.

The safe exposure limit for nPB has been measured at 5-10 ppm – industry authorities even recommend further reducing to 0.1 ppm – whereas Opteon™ Sion has a safe exposure limit of 201 ppm, which is comparable to everyday rubbing alcohol.

Performance:
The cleaning power of Opteon™ Sion has been measured up to a 100 KB value, which is a cleaning power standard. Opteon™ Sion can match nPB and other common formulations ounce for ounce, providing all their solvency benefits, while offering a superior toxicity profile.

Maintenance:
While Opteon™ Sion is a safe, effective, and environmentally friendly nPB replacement, nPB requires acid acceptance testing, stabilizer maintenance, and solvent air monitoring for safe and effective use. These additional formulations and processes increase your overall cost of using nPB – making Opteon™ Sion an even better, safer value.

Benefits:

Designed to clean a wide range of soils

Fast, residue-free drying; offers viscosity to clean oil and grease from small parts, leaving no residue

Compatible with a broad range of metals, plastics, and elastomers

Chemically and thermally stable

Zero ODP and low GWP (< 15 GWP)

Recyclable and reusable

Low surface tensions

Non-flammable

Allows for the continued use of existing equipment (no or minimal equipment upgrade necessary)

Easy to handle, easy to store

Available in multiple package sizes

We are into offering a quality approved array of Lubricating Gear Oil. The Gear Oil we offer is highly demanded amongst the clients for its availability in various packaging. Moreover, these products are suitable for various applications.

Features:

• Increase equipment reliability
• Reduce operating costs
• Extend machine life

• Textile Tenter Frames
• Conveyors
• Lateral Chain Belts
• Tunnel / Lap / Tray Ovens
• Cam
• Bearings
• High Speed Can Lines
• Oven Slides & Gears
• Conveyor Roller Ball Bearing Chains
• Wood Processing
• Coating Ovens Automotive Industry

• Superior resistance to wear
• Highest degree of high temperature corrosion-oxidation stability
• Reduced maintenance cost & cleanliness
• Non-slinging

IT-7400 High Temperature Chain Oil is stable, high performance synthetic oil designed for high temperature applications designed for use in paint booth conveyor chains, ceramic production, glass production, paper, plywood production or textile stenters chains.

It can also be used as a bearing lubricant in high temperature environments. The product features very low evaporation rate for longest life, an excellent oxidation stability with no deposits and outstanding film strength, better than other synthetics. It has a wide useful temperature range with built in non-sling, non-drip characteristics. Reliability under adverse conditions of temperature, time, wear and oxidation is assured. The lubricant offers outstanding anti-wear properties with reduced chain drag.

IT-8000 Series Synthetic Gear Oil is formulated with superior polyalkylene glycol (PAG)-based oils. Premium anti-oxidants, anti-wear, and corrosion inhibitor additives enhance the performance of these products. These are recommended for industrial worm gear lubrication

They can also function well as general purpose gear lubrication. The oils resist hydrocarbon washout/dilution and have a high load carrying capacity. An excellent oxidative & thermal stability reduces the sludge and deposit formation and lower friction it produces leads to lesser power consumption.

It is good steel on steel and steel on bronze anti-wear lubricant. Typically applied on rotary vane, centrifugal & reciprocating compressors, it is used on enclosed gears and bearings, as well.

IT-7401 High Speed Oil For Textile Industry is stable, high performance synthetic oil designed for high speed applications in the textile industry. The oil is used for lubrication of the rotor bearings of open-end spinning machines operating at higher speeds.

It features a very low evaporation rate for longest life and has a wide useful temperature range. The oil has excellent oxidation stability, leaves no deposits and has a built in non-sling, non-drip characteristics. It resists "pumping" and assures reliability under adverse conditions of temperature, time, wear and oxidation.

IT-5000 Series Water Based Cleaner Concentrate Oil is a biodegradable, phosphate and caustic free cleaner formulated for heavy-duty industrial use. It has superior wetting capabilities and free rinsing properties of IT-5003 solution combine to provide an exceptional cleaner for removing difficult soils and contaminants.

IT-5003 solution readily removes grease, oils, waxes and particulates from automotive, aircraft, and similar mechanical

Components:
removes oils and drawing compounds from stampings; cleans shop oils, greases, and similar soils from components prior to secondary finishing operations including painting, plating, application of various electrostatic spray coatings; and removes grease, oils, and light carbon deposits from stampings, turnings, and similar components used in every sector of industry.

IT-5003 solution can be safely used with most base metals and alloys without pitting or discoloration. It is very soluble in water, methanol, ethanol, acetone, acetic acid, and ethyl acetate. The cleaner is low on corrosivity with negligible volatile organic compounds (VOCs), non-flammability, low odor & low toxic.

• Free from impurities
• High viscosity
• Balanced composition

• Lubrication failure & premature wear of the ejector pins, grease for the tie-rods/tie bars. Seizing of the high temperature screwed connections etc. Mould protection coatings & high performance cleaners for the moulds.

• A complete package of the high performance long-life lubricants & maintenance products designed esp. for the plastic injection industry is available.

• Highly effective
• Excellent oxidation stability
• High thermal stability

We are engaged in supplying Food Grade Lubricants Oil from Brugarolas SA Spain to meet the requirements in the Food-processing and Pharmaceutical Industry. Food-grade lubricants are required to be compliant with food regulations, either HACCP or GMP requirements.

IT-7405 High Vacuum Diffusion Pump Oil is a single component silicone diffusion pump fluid for high vacuums of upto 10-8 torr. A low vapor pressure and thermal stability make it ideal vacuum oil for use in mass spectrometers or electron microscopes etc. It offers quick pump-down, even after exposure to air under operating conditions. It is a clear, Tetramethyltetra phenyltrisiloxane,single-component fluid.

Low vapor pressure of IT-7405 silicone fluids at baffle temperatures results in low migration rates. Jets and boiler surfaces hence stay clean; it exhibit virtually no breakdown or decomposition under operational conditions. The recovery rate of IT-7405 after exposure to air at operating temperatures is faster. The fluid features minimal back-streaming, longer service life and cleaner systems & less maintenance required.

IT-7406 High Vacuum Diffusion Pump Oil is a silicone diffusion pump fluid for high vacuum of upto 10^-9 torr. A low vapor pressure and thermal stability make it ideal vacuum oil for use in mass spectrometers or electron microscopes etc. It offers quick pump-down, even after exposure to air under operating conditions.

Low vapor pressure of IT-7406 silicone fluids at baffle temperatures results in low migration rates. Jets and boiler surfaces hence stay clean; it exhibit virtually no breakdown or decomposition under operational conditions. The recovery rate of IT-7406 after exposure to air at operating tempera­tures is faster.

The fluid features minimal back-streaming, a longer service life allowing systems keep clean & hence lesser maintenance is required.

IT-6000 Series Mineral Gear Oil are extreme pressure industrial lubricating & gear oils containing extreme pressure additives. These are also fortified with antifoam, antirust and anti-oxidation agents and have excellent oxidation resistance and thermal stability.

The oils exhibit very good extreme-pressure, anti-wear, oxidation resistance properties and water Demulsibility properties. These are non-corrosive lubricant for non-ferrous metals, in particular with bronze alloys and meet the requirements of the strictest specifications for industrial gear lubricants as per US Steel 224, IS: 8406–1993, IPSS: 1-09-003-82 & AGMA 250.04. The gear oils are used in reducers, all types of gears except the hypoid, worm gears & bearings and heavy loaded parts of machinery.

Problem:
Frequent change-over of oil, excessive wear, pitting & galling of the gear teeth.

Solution:
IT-4000 series gear oils are formulated with new generation additives that heals the surface. It helps reduce the temperature and increases the change-over intervals significantly.

Synthetic PAO Based Gear Oils for enclosed gear systems requiring ashless antioxidants, antiwear and mild EP additive systems. These oils have been designed to provide satisfactory lubrication under hydrodynamic and mild boundary lubrication conditions. These are recommended for gear systems where moderate loads and high temperatures are expected including worm gears containing soft metals such as bronze, brass and copper.

IT-2598 Motorcycle Chain Lubricant Oil are high-speed applications that operate in tough conditions like rain, dirt, sand, and high shock loads. These specially developed chains are used as the part of the drive train to transmit the motor power to the back wheel.

The chain must never be run dry. Lubricating the chain regularly prolongs its life. IT-2598 is based on synthetic oils containing oil soluble organo-moly compounds. It goes on to wet to penetrate parts deeply, setting up an adhesive lubricating coating that does not fling-off at high speeds. The protective coating set up on the outer of the chains protects against the corrosion and weathering effects.

IT-2601 Textile Spindle Oil is mineral oil formulation designed to achieve maximum lubricity in unusually high temperature conditions as these existing in the in the textile spindles in ring frames/open end machines. Providing excellent lubrication, it enhances spindle life and helps reduce the power consumption of the spindle device.

The oil features reduced wear, longer life & remains in the spindle for longer durations. It provides an excellent corrosion protection and possesses a high temperature & oxidation stability.

IT -3408 Refrigeration Compressor Oil are heavy-duty refrigeration compressor oils made from select base stocks for minimum carbon deposits.

These have special additives for excellent resistance to ammonia and other refrigerants and contains exclusive wear-reducing additive. These are not recommended for use with HFC refrigerants. This product has efficient additives that inhibit sludge formation in the presence of commonly used refrigerants. Sludge will clog expansion valves, stick valves and rings, and cause deposits that choke the system’s cooling efficiency. IT-3408 will not produce corrosive or sludge-forming reactions with metals and refrigerants commonly found in refrigeration systems.

It does not foam and has excellent low temperature performance because it is supplemented with pour point depressants. This assures that the oil will remain perfectly fluid at low temperatures while maintaining the highest viscosity for effective lubrication. IT-3408 is used for reciprocating and rotary refrigeration compressors. Cold storage warehouses, ice rinks, and meat and other food processors are typical users of IT-3408.

Because of its very low pour point, this oil is specially suitable for lubrication of compressors using R12, R22, R11, R113, R1381 and R502 as refrigerants, and also suitable for NH3 and CO2 refrigerant compressors.

IT-7404 Knitting Oil For Textile Machinery is formulated using high quality refined mineral oil which exhibits excellent stability resists oxidation and break-down even when exposed to prolonged high temperatures.

Incorporating effective anti-wear additives, the lubricant exhibits good anti-wear properties protects needles, sinkers and cams against wear. It also protects against corrosion.

IT-2589 is a precision cleaner for cleaning and degreasing of the metal surfaces. It cleans quickly & effectively & guarantees absolutely clean surfaces. The cleaner evaporates without leaving any residues and is free CFC & CHC’s.

It is an ideal cleaner for de-greasing metal surfaces before surface treatment. Other applications include its use as a cleaning agent for bearings before lubrication, for removing oil, grease and dirt residues from assemblies or as a cleaner during repair jobs, etc.

• Environmental safety cleaner and degreaser

• For basic cleaning prior to any assembly.
• Degreasing of injection mould, work pieces and machine parts. 
• Alternative to environmental harmful cleaners.
• Environmental friendly cleaning, hot/cold, with/without water, e.g. machinery  equipment
• Dewaxing of new vehicles, engines and gear boxes, workshop floors and tools.

• Short term corrosion protection
• Trouble-free separation in skimming-tank
• Not water-soluble, fast phase separation
• Free from aromatic compounds