Arihant Corporation

• Fully synthetic oil with modern EP-additives and anti-oxidants for high temperatures

• plasterboard dryers,
• conveyors in the automotive industry,
• dryers, painting lines,
• breadmakers.

• H2 registered
• Kosher certified 
• Halal certified
• Excellent wear properties 
• Excellent corrosion protection         Outstanding creeping and penetrating

• Low friction coefficient· 
• Adhesive additives prevent dripping and spinning-off   
• chemical stable  
• Silicone-free

• Media-resistant special grease with excellent wear and corrosion protection

• Heavily loaded rolling and plain bearings at medium speeds under adverse ambient influences like humidity, acids, alkalis as well as high temperatures.
• Typical applications: calenders, rollers, pumps, dryers, engines in all industrial areas and for shipping and mining
• Proven for the lubrication of tool elements like ejectors, core pullers, sliders and die-sets in plastic injection moulding.

• Universal in use
• Very media-resistant
• Good water resistance
• Excellent corrosion protection
• Excellent wear properties
• Free from solid lubricants
• High sealing and adhering effect
• Silicone-free

• High performance grease for a wide application range

• For long-term lubrication at low and high operating temperatures like plain and roller bearings, joints, slides, hinges and guidings.
• Especially suited for ball bearings, not so good for roller bearings.

• Reduces wear and tear
• Excellent corrosion protection
• Conveyable in central lubricating systems (progressive central lubricating systems excluded)
• Wide temperature range
• High speed factor
• Economical by high operational safety

• Special grease for electrical contacts, switches and sensors

• Successfully used for lubrication of plastic/plastic friction pairings like in small gears of electric tooth brushes
• For lubrication and contact protection of electronic components e.g. in the automotive industry installation technology

• power and control power switches,PCB`s and potentiometers.

• Reduces wear and tear.
• Excellent corrosion protection·
• Extremely water repellent·
• Improves contact making·
• To a large extent compatible with plastics· 
• Avoids spark formation·
• Resistant to oxidation and ageing.

Properties:

Clean application

Reduces wear and tear

Excellent corrosion protection

Extended relubrication cycles

Highest load carrying ability

Economical in consumption

IT-4306 High Temperature Synthetic Bearing Grease is an outstanding heat stable, long life, synthetic non-melting greases which exhibits superior high temperature stability. Traditional applications include it use on conveyors, ovens, electric motors & other high temperature processing equipment. Made from the most thermally stable synthetic oil.

IT-4306 out-performs in areas where other synthetic greases fail. The lubricant has an excellent thermal stability & provides longest life with a useful temperature range of -40 to 235 degree C . It exhibits outstanding oxidation stability, no deposits & very low evaporation rate.

The grease will not form coke, sludge, or varnish within its useful temperature range. It has a low bleed rate for durability & is non-melting dropping point over 260 °C.

IT-4319 Water Resistant High Temperature High Load Grease is multi-use grease for lubrication of the ball and rolling bearings subjected to high/shock loads or alkaline environment. It is suitable for lubrication over wide temperature range of – 10 °C to 180 °C.

Using select additives which impart exceptional load carrying abilities, the grease is formulated to resist high shock loads and has high lubricating properties which results in extended cycling times and cost reduction. It is resistant to mechanical stress and therefore beneficial to machine parts subjected to vibrations loads. The lubricant is designed to minimize friction and wear on mechanisms operating under operating conditions such as high loads, temperature, water, alkaline environment etc.

It has the capability to prolong re-lubrication intervals and minimize wear in many industrial applications. IT-4319 has excellent pumpability characteristics making it especially suitable for centralized lubrication systems of large industrial units. It is also recommended for wide range of industrial applications where high temperatures are encountered. It is ideal for steel plant applications such as continuous casters, couplings, oscillators, run out rolls, blowers etc. It is also suitable for mining industries for applications such as rock crushers, conveyor, drilling machinery as well as rotary kiln in sponge iron industry etc.

IT-4316 High Temperature Grease is high temperature grease designed for use of high temperature bearings and sliding parts exposed to high temperature and heavy loads at moderate speeds. It is used for lubrication of all kinds of rolling and plain bearings working under heavy loads.

Some examples of application are: tar mixing plants, foundry ladles, hot air ventilators, shaking screens, sintering plants etc. The grease, with the service temperature range of - 25 up to + 160°C is adhesive and offers emergency running characteristics protecting the bearings against wear.
It is suitable for central lubricating systems

IT-4310 High Temperature Polyurea Grease is designed for use of high temperature bearings and sliding parts exposed to high temperature, heavy loads at slow and moderate speeds or corrosive influences like in continuous casting plants, forging plants or drying kilns etc.

The grease is used for lubrication of trolley bearings, conveyor bearings, calendar rolls bearings, induced draft fans or drier bearings etc. Designed to perform in the service temperature range of - 20 up to + 180 °C, it exhibits a good mechanical oxidation stability.

It possesses a good water resistance provides excellent corrosion protection. It is adhesive and maintains constant consistency over its entire operating temperature range.

IT-4116 Silicone High Temperature Grease is formulated with high quality silicone oils and thickeners. It is adherent and provides excellent high temperature lubrication properties having the working temperature range of -40 to +200 ^oC.

It is used for all types of bearings, rubber parts, and electrical parts, plastic parts etc. in textile, cement plant, fertilizers, steel plants, and chemical plants. The product features a high temperature stability; it offers a low friction and reduces lubrication frequency. The consistency does not change much over a wide range of temperatures.

IT-4305 White High Performance Multipurpose Grease is a mineral oil based extreme pressure multi-use grease for lubrication of the ball and rolling bearings, hinges etc. Using select additives which impart exceptional load carrying abilities, the grease is formulated to resist high shock loads and has high lubricating properties which results in extended cycling times and cost reduction.

It exhibits excellent adherence to the metal surface, a good pumpability lubricity and resists water. The lubricant provides excellent rust and oxidation properties. Proven extreme pressure additives ensures maximum protection against shock loads with reduced metal to metal contact and hence minimal wear on moving parts which results in reduction of maintenance costs.

• Maintenance-free lubrication of rolling and plain bearings
• For sliding surfaces in high temperature areas, calender bearings, fan bearings and burning ovens

• Excellent corrosion protection
• Highest load carrying ability
• Stable to high temperatures
• Very good wear protection

IT-4111 Open Gear And Wire Rope Lubricant Grease is heavy duty adhesive grease designed for open gears, wire-ropes, plain bearings, guide ways, guide tracks, chains etc. The grease provides excellent corrosion protection and absorbs vibrations.

Designed for open girth gear drives, wire-ropes highly loaded, slow moving plain bearings, guide-ways, guide-tracks chains etc., the lubricant - equipped with special EP additives and a selection of solid lubricants, the lubricant offers and excellent wear protection gear teeth pitting.

• H1 high-temperature grease for long-term lubrication in the food and pharmaceutical industry, particularly at high temperatures and aggressive atmosphere

• For long-term or life-time lubrication of rolling and plain bearings and all sliding pairs susceptible to wear under extreme conditions, especially in food and pharmaceutical industries.
• Typical applications: baking ovens, baking lines, guide pulleys of conveyor chains, kiln cars, calendars and other applications e.g. in dairies and beverage filling.

• H1 registered
• Kosher certified
• Halal certified
• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Resistant against chemicals and aggressive media
• Resistant to oxidation and ageing
• Economical in consumption 

• H1 registered
• Resistant to cold and hot water, alkaline solutions etc
• Compatible with usual plastic and sealing materials
• Kosher certified
• Halal certified
• Reduces wear and tear
• Excellent corrosion protection
• No gumming
• Neutral to beerfoam - if properlyappliedVery good resistance to ageing

• Ageing-stable high-performance grease with MoS.

• Especially developed for use in gear drive shaft/clutch disc-hub (automotive).
• For all kinds of roller and sliding bearings with slow and/or oscillating movements
• under heavy conditions.
• For lubrication of keyway profiles and threaded spindles.

• Universal in use.
• Reduces wear and tear.
• Extended relubrication cycles.
• Outstanding emergency running characteristics.
• Applicable for almost all bearing types.
• Extreme load and shock resistant.

• High viscosity
• High functionality
• Extend valves life

• Accurate components
• Easy usage
• Longer shelf life

• For long-term or lifetime lubrication of rolling, bearings, highly loaded gears and sliding pairs susceptible to wear under extreme conditions, like vibrations or shock loads etc.
• Due to the special EPL additive technology micropitting and pittings are avoided and re-smoothening of surface damages is enabled.

• shock loaded gear motors, newspaper printing machines, wood milling machines, robots, spindle bearings and other applications in all industrial sectors.

• Avoids fretting corrosion
• Excellent corrosion protection
• Excellent wear properties
• Extremely low coefficient of friction
• Increases the quiet running
• Surface smoothening

• Fully synthetic high speed and spindle grease

• Moreover recommended also for thread and ball spindles, linear drives and linear guidings, moving gears, toothed wheels of small gears and bearings of cable cars.

• Especially designed for lubrication of rolling and plain bearings operating at high rotational speed and/or low temperatures.

• Reduces wear and tear
• Steady also at very high speeds
• Excellent corrosion protection
• Avoids stick-slip
• Very good low-temperature properties
• Wide temperature range
• Resistant to oxidation and ageing

• Fully synthetic special grease for long-term lubrication, stable at high temperature and aggressive ambience.

• Circle conveyors, paint lines, fans, kiln cars, calendars, film stretching machines, extraction plants of textile machines.
• Long term and for-life lubrication of plain and roller bearings and all friction pairings under extreme conditions.
• Excellently suited for lubrication of plastic/plastic and plastic/metal surfaces (automotive).
• Approved and recommended for the lubrication of thermally high loaded bearings on continuous wood-press systems as well as for tire containers.

• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Extremely low evaporation rate
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Silicone-free
• Economical in consumption

IT-4308 High Speed Plastic Compatible Grease is based on PAO & a lithium soap thickened lubricant containing solid lubricants, the grease is designed for use on plastic, plastic-metal components.

It offers a wide service temperature range & has low friction co-efficient and a low noise performance. Typical applications include its use on the pneumatic cylinder seals, as lubricant for automotive switches etc.

• For long-term or life-time lubrication of rolling and plain bearings and all sliding pairs susceptible to wear under extreme conditions

• Circle conveyors, paint lines, fans, kiln cars, calendars, film stretching machines, extraction plants of textile machines.
• Excellently suited for lubrication of plastic/plastic and plastic/metal surfaces (automotive).

• High load carrying ability
• Excellent wear properties
• Extended relubrication cycles
• Extremely low evaporation rate
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Silicone-free
• Economical in consumption

IT-4303 High Speed Grease for Textile Applications is synthetic base high speed grease designed for the roller bearings operating at high speeds.

IT-4109 Low Temperature Silicone Grease is premium quality to be used under a wide range of temperature conditions for light-load applications where there is metal-to-metal or metal-to-plastic friction at low to high speeds and at low temperatures. The grease is designed for use on valves operating at very low temperatures, in roller and conveyer equipment, control cables, Bowden cables, electric motors, photographic equipment, optical equipment, measurement equipment etc.

It is also used for lubrication between rubber and metal parts in pneumatic systems, for lubrication of ‘O’ rings. other general industrial applications. The lubricant has a wide temperature range, a high chemical inertness no corrosive effect on metals.

• Fully systhetic solid free special grease for long term lubrication at high temperature and in aggressive atmosphrere 

• Lubrication of ejector pins, slides, folding units, latch locking units as well as all sliding surfaces in plastic injection moulding tools.
• Especially dedicated for production of all kinds of visible parts and plastic parts/packagings for the food and pharmaceutical industries.

•  H1 registered
• Kosher certified
• Halal certified
• Approved and recommended from well-known manufacturers worldwide
• Thermally stable up to +300°C at extremely low evaporation rate
• Achievement of high number of shots without relubrication
• Stays in place, no transport on to the plastic parts
• Outgassing substances don't cause stress cracks (DIN 53449)
• Neutral behavior to common elastomers and plastics
• Packing of the injection-moulded parts possible without cleaning
• Stable to aggressive plastic condensates
• Optimal running in properties for new tools

IT-4112 Silicone Grease For 'O' Rings is a synthetic oil-based, Lithium hydroxystearate soap thickened with PTFE. Tenacious adhesive grease by design, the lubricant has good compatibility with plastics and offers a wide service temperature range.

The grease has low friction co-efficient and low noise performance and a service temperature range of - 60 to + 120°C. The lubricant is designed for use for plastic-plastic or plastic-steel components, for lubrication of pneumatic cylinder seals ‘O’ rings.

 
It is also used for enclosed gear-boxes  actuators or as a lubricant for automotive switches.

• H1 silicone lubricating grease for a wide application range

• As assembly lubricant for plastic-sheathed cables to be pulled through cable channels. 
• For waterproof electrical connectors, electrical components and terminals.
• For lubrication and sealing of connectors, O-rings, control and pressure regulating 
• valves, especially in food and pharmaceutical industries.

• H1 registered
• Kosher certified
• Halal certified
• Resistant to cold and hot water, steam
• Outstanding sealing properties
• Excellent oxidation stability
• Agreeable odour
• Tasteless
• Nonvolatile and nonconductive
• Neutral to elastomers, plastics and metals

• Fully synthetic special grease free from PTFE, for long-term lubrication under extreme conditions.

• Typical applications are rolling and plain bearings at low speed in engineering and plant equipment ( e.g. industrial furnaces), fire protection fittings, locking systems, slideways, joints and other sliding surfaces at very high temperature.
• In injection moulding and diecasting for the lubrication of metallic surfaces (e.g. ejector pins).
• Multiple uses in high-temperature applications, if conventional PFPE greases with PTFE are not expected to create satisfying results.

•  Excellent wear properties
• Resistant against chemicals and aggressive media
• Neutral to most plastics and elastomers
• Considerable extension of the re-lubrication cycles
• Temperature-stable up to +300°C
• Suitable for high loads due to new types of additives
• PTFE-free
• Economical in consumption

IT-4311 High Temperature Teflon Impregnated Grease is high temperature grease designed for use of high temperature bearings and sliding parts exposed to high temperature and heavy loads at slow and moderate speeds.

The grease has a service temperature range of - 30 up to + 200 °C and is used for lubrication of trolley bearings, conveyor bearings; calendar rolls bearings, induced draft fans or drier bearings etc.

IT-3105 Lithium Complex Moly Grease is a high quality multipurpose lithium soap E.P Grease containing solid lubricants, MoS2 and other highly efficient extreme pressure additives. Designed for long-term lubrication, it is well suited for plain and anti-friction bearings as well as other grease-lubricated machine elements.
 
The additive used in the grease provides good corrosion protection and water wash out properties. Under load, and when boundary lubricating conditions prevail, film containing MoS2 is deposited from the grease to the sliding surfaces making available emergency lubrication. Special ant-wear additives prevent metal-to-metal contact at high loads reducing the coefficient of friction and minimizing wear. It markedly improves running-in conditions. Some examples of application are its use for plain bearings and guides, joints and splined shafts, threaded spindles and small gear units at low speeds or bearings subject to severe impact loads or exposed to extreme atmospheric conditions. It is also used for lubrication of clutch bearings, fan bearings, electric motors bearings. These are recommended for the use in generator bearings, universal joints bearing, journal bearings, heavy loaded bearings in the shovel and similar other applications in the earth moving equipment. IT-3105 is available is 1 Kg, 5 Kgs & 25 Kgs containers in various consistencies

IT-4108 Silicone High Vacuum Grease is premium High vacuum silicone valve & packing grease formulated with high quality silicone oils and thickeners. Extremely adherent, this grease is resistant to water and provides excellent sealing properties. The grease is designed for lubrication of ground connections parts of industrial vacuum plants, laboratory equipment, shutoff valves and taps etc.

It is resistant to heat with no carbonizing & melting. Its vapor pressure remains negligible up to 200 OC & maintains its consistency between -40 ^oC and + 200 ^oC. The product exhibits chemical inertness with no corrosive effect on metals & is neutral to most elastomers & rubbers with plasticizing effect on rubber and plastics. It is also resistant to solvents.

The grease is non-toxic, neutral to plastics, rubbers, and ‘0’ rings. The consistency does not change much over a wide range of temperatures. The grease is resistant to many chemicals including acetone, glycerin, ethylene-glycol, ethanol and methanol etc.

IT-3103 Multipurpose Li-Complex Grease is a mineral oil based extreme pressure multi-use grease for lubrication of the ball and rolling bearings, machine components lubricated with central lubrication system, enclosed gearboxes etc. Using select additives which impart exceptional load carrying abilities, the grease is formulated to resist high shock loads and has high lubricating properties which results in extended cycling times and cost reduction.

It helps minimize friction and wear on mechanisms operating under operating conditions such as high loads, temperature etc. It has the capability to prolong re-lubrication intervals and minimize wear in many industrial applications. IT-3103 is resistant to mechanical stress and therefore beneficial to machine parts subjected to vibrations loads. Excellent oxidation stability makes this lubricant an ideal long-term lubricant. It displays good sealing properties and protects mechanisms from dust, humidity or contamination. The grease is also good for thermally stressed roller bearings.

IT-3104 White Lithium Grease is an ideal for heavy-duty applications, the lubricant – also designed for easy dispensing will not melt, freeze, wash off, or break down under high speeds, extreme heat or heavy loads. It provides a clean, white low odor grease in a easy to dispense form which is enhanced with Teflon® fluoropolymer for better water resistance, maximum lubricity, higher temperature stability better boundary lubrication protection.

It performs in a wide temperature range of -17°C to 204°C. The lubricant provides a long lasting protection in a broad range of applications conditions reducing friction in metal to metal metal to plastic applications. Common application of the product are its use on open lube points and high load applications including gears and shafts, heavy duty chains, cables, machinery, conveyors, lifting mechanisms, overhead garage doors, axles, bearings, pivots, linkages, cables, fan motors, slides, couplings, automotive hinges, brake parts, latches, springs, coils, pulleys, bolt threads, plumbing fixtures, etc.

IT-4304 Electrically Conducting Grease is synthetic base grease with low inner friction for the lubrication of electrical contacts. The grease is also ideal for use of the heavily loaded plain bearings with metal-to-plastic or metal-to-elastomeric-contact. It protects from corrosion and reduces friction and wear on mechanisms operating under normal to higher load and /or speed.

It also improves the sliding ability of plastics, elastomers and above all of non-ferrous metals. The grease is designed to prolong the lifetime of static and dynamic rubber seals. Typically used as a conducting media in the seam welding machines, the lubricant improves sliding ability and operational reliability of metal-to-plastic or metal-to-elastomeric-contacts.