Call 08048962495 80% Response Rate

our range

Industrial Fluids

Providing you the best range of it -7402 silicone fluids, cut-setral-cst 4 stamping and drawing fluid, heat transfer fluid, cut-setral-cst 2 stamping and drawing fluid, it-3100 synthetic hydraulic fluids and it-3200 synthetic hydraulic fluids with effective & timely delivery.
IT -7402 Silicone Fluids

IT -7402 Silicone Fluids

Price on Request
Usage/ApplicationIndustrial
Viscosity0.65 to 3,00,000 Cst
Unit Pack Size5 KGS
Packaging TypePlastic Can
Model Name/NumberIT -7402
BrandCross Net
Temperature Range-40 to 200 deg C

IT -7402 Silicone Fluids are polydimethylsiloxane oils with average kinematic viscosities ranging from 50 to 10,000 cSt. These are heat stable & exhibit excellent oxidation resistance, very low vapor pressure and high flash point.

The fluids show very little change in physical properties over a wide temperature span - a relatively flat viscosity-temperature slope, and serviceability from -40°C up to 200°C. The fluids have good dielectric properties over a wide range of temperatures and frequencies and a low surface tension - readily wets clean surfaces to impart water repellence and release characteristics. Typical applications includes its use as a mechanical fluid, hydrolic stabilizers, damping media, as release agent, foam preventative, as lubricant or as an insulating fluid.

View Complete details

get quote request a call back
CUT-Setral-CST 4 Stamping and Drawing Fluid

CUT-Setral-CST 4 Stamping and Drawing Fluid

Price on Request
BrandSetral
Usage/ApplicationIndustrial
Unit Pack Size20 L
Packaging TypeDrum
Model Name/NumberCUT-Setral-CST 4 Stamping Fluid
Temperature Range- 5 to + 150 deg C
FormOil
Additional Information
Evaporating stamping and drawing fluid with wear-reducing synthetic additives

 Use:
  • Drawing, deep-drawing, stamping and folding of sheets and profiles.
  • Suitable for steel and nonferrous metals.

Properties
  • Reduces wear and tear
  • Evaporates quickly
  • Evaporates without residues
  • Extended lifetime of tools
  • Free from heavy metals and their compounds
  • Contains no chlorine
  • Harmless in application and use
  • Subsequent cleaning not necessary
  • Paint compatible, suitable for water-based and solvent based paints
  • Silicone-free

View Complete details

get quote request a call back
Heat Transfer Fluid

Heat Transfer Fluid

Price on Request
Packaging TypeDrum
Packaging Size26 And 210 Liter
Usage/ApplicationINDUSTRIAL
BrandKyros
FormOil

KYROS SUPERTHERM 32 is a paraffinic heat transfer fluid for use in closed unpressurise Heat Transfer Fluid systems operating at bulk oil temperatures up to 320C. KYROS SUPERTHERM 32 provides excellent resistance to thermal cracking and chemical oxidation. KYROS SUPERTHERM 32 is nontoxic with very low odour level and is compatible with most seal materials. KYROS SUPER THERM 32 provides high specific heat and thermal conductivity over the operating temperature range and provides rapid heating as an efficient heat transfer medium.

Product Features & Benefits

  • Suitable for bulk temperatures upto 320 deg. C (600 deg. F) and can stand skin temperatures from 320 to 270 deg. C( 600 to 700 deg. F)
  • Highly stable, non toxic and low odour level.
  • Compatible with seal materials.
  • Optimum heat and thermal conductivity over wide temperature range, offering rapid heating and maximum flexibility.

 

View Complete details

get quote request a call back
CUT-Setral-CST 2 Stamping and Drawing Fluid

CUT-Setral-CST 2 Stamping and Drawing Fluid

Price on Request
BrandSetral
Packaging TypeDrum
Vehicle TypeIndustrial
Unit Pack Size200 L
Model Name/NumberCUT-Setral-CST 2
FormOil
Additional Information
Evaporating stamping and drawing fluid with wear-reducing synthetic additives

  Use:
  • Drawing, deep-drawing, stamping and folding of sheets and profiles.
  • Suitable for steel and nonferrous metals.
  • For production of food packagings of tin and aluminum.

Properties
  • Reduces wear and tear
  • Evaporates quickly
  • Evaporates without residues
  • Extended lifetime of tools
  • Free from heavy metals and their compounds
  • Contains no chlorine
  • Harmless in application and use
  • Subsequent cleaning not necessary
  • Paint compatible, suitable for water-based and solvent based paints
  • Silicone-free

View Complete details

get quote request a call back
IT-3100 Synthetic Hydraulic Fluids

IT-3100 Synthetic Hydraulic Fluids

Price on Request
Model Name/NumberIT-3100
Packaging TypeBucket
BrandCross Net
Packaging Size20-25 Liter
FormOil
UsageAutomobile
Temperature Range-40 to 150 deg C

IT-3100 Synthetic Hydraulic Fluids are designed for use on hydraulic systems, pumps, motors, circulating systems etc. where exposures to extreme temperatures exist.

These fluids are formulated using synthetic base stocks & are compounded with anti-rust, anti-wear, and anti-oxidant additive systems. Natural resistance to carbon and varnish formations provides for equipment operation with minimum deposits. These are fortified with antifoam, antirust agents and have excellent oxidation resistance and thermal stability and display very good extreme-pressure and anti-wear properties. The oils possess a very high resistance to oxidation and are non-corrosive lubricant for non-ferrous metals, in particular bronze alloys.

These have excellent water Demulsibility properties. The hydraulic fluids are ideal for applications carrying low and high temperatures like brine compressors, ice machines, for circulation systems, turbines & air compressors.

View Complete details

get quote request a call back
IT-3200 Synthetic Hydraulic Fluids

IT-3200 Synthetic Hydraulic Fluids

Price on Request
Model Name/NumberIT-3200
Packaging TypeBucket
BrandCross Net
FormOil
Packaging Size20-25 Liter
UsageAutomotive
Temperature-40 to 150 deg C

IT-3200 Synthetic Hydraulic Fluids are fully synthetic and have been formulated from premium polyalphaolefin (PAO) base fluids for use in a wide variety of industrial and mobile hydraulic systems operating at high pressure and under extreme temperature conditions. These fluids have superior anti-wear and rust and oxidation inhibitors to provide excellent wear protection for hydraulic pumps and motors. They have outstanding oxidation resistance and thermal stability to help minimize deposit formation and provide long service life, and protects against rust and corrosion. This series also has excellent.

View Complete details

get quote request a call back
IT-5000 Mineral Hydraulic Fluids

IT-5000 Mineral Hydraulic Fluids

Price on Request
Usage/ApplicationIndustrial
Packaging Size20-100 Kg
Packaging TypeDrum,Can
Model NoIT-5000
FormOil

IT-5000 Mineral Hydraulic Fluids are premium-quality, ash-less, anti-wear, high-viscosity-index hydraulic oils. They are manufactured using high-quality base stocks which possess exceptional chemical and thermal stability. Additionally, these contain a technologically advanced additive system.


The oils exhibit superior hydrolytic stability and filterability. IT-5000 oils are recommended for use in all types of industrial, mobile, and marine hydraulic systems utilizing vane, gear, or piston (axial or radial) pumps. These multi-grade oils are particularly recommended for high-pressure, high-temperature hydraulic systems, and for systems which operate in a high-moisture environment with wide variances in temperature.


Some examples are mobile construction equipment, bucket-trucks, marine and offshore equipment, and other equipment operating under low-temperature conditions. Applications where these are used include hydraulic systems, electric motors, gear cases, hatch cover machinery on-board ships, circulating systems, bearings-journal, anti-friction, machine tools or air compressors on offshore platforms and boat.

View Complete details

get quote request a call back
Mineral Oil Based Hydraulic Fluids

Mineral Oil Based Hydraulic Fluids

Price on Request
Usage/ApplicationIndustrial
Packaging Size20-25 Litres
Vehicle TypeHeavy And Light Vehicle
Packaging TypeDrum
FormOil

Mineral Oil Based Hydraulic Fluids are premium-quality, ash-less, anti-wear, high-viscosity-index hydraulic oils. They are manufactured using high-quality base stocks which possess exceptional chemical and thermal stability. Additionally, these contain a technologically advanced additive system.

The oils exhibit superior hydrolytic stability and filterability. IT-5000 oils are recommended for use in all types of industrial, mobile, and marine hydraulic systems utilizing vane, gear, or piston (axial or radial) pumps. These multi-grade oils are particularly recommended for high-pressure, high-temperature hydraulic systems, and for systems which operate in a high-moisture environment with wide variances in temperature.

Some examples are mobile construction equipment, bucket-trucks, marine and offshore equipment, and other equipment operating under low-temperature conditions. Applications where these are used include hydraulic systems, electric motors, gear cases, hatch cover machinery on-board ships, circulating systems, bearings-journal, anti-friction, machine tools or air compressors on offshore platforms and boat.

View Complete details

get quote request a call back
IT-2594 Multifunctional Fluid

IT-2594 Multifunctional Fluid

Price on Request
BrandCrossNet
Usage/ApplicationIndustrial
Unit Pack Size1-5 Liter
Packaging TypeCan
Model NoIT-2594
FormLiquid

IT-2594 Multifunctional Fluid designed as a maintenance aid. The product helps loosen rust, dismantle corroded seized threaded connections. It displaces moisture and therefore is used for restoring wet electrical contacts. It provides mild lubrication and protects against corrosion.

A low viscosity fluid, it is also often used for short-term corrosion protection esp. for corrosion protection of measuring and cutting tools. The product provides a combination of cleaning and thin film lubrication and absorbs remains of water, leaving behind a protective film on the surface which is compatible with common sealing materials. The fluid is used for protection of wet metal elements or for easy removal of fretting corrosion and corrosion residues.

View Complete details

get quote request a call back
Metal Working Fluid

Metal Working Fluid

Price on Request
Packaging TypeCan, Bottle etc
Usage/ApplicationUsed in metal working
FormLiquid
Temperature25 deg C
We are Leading Supplier and Traders of Metal Working Fluid.

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES