CLEANER AND DEGREASER

Product Details:

IT-5001, a high-purity precision liquid is a best available best available replacement to CFC11.Compared to CFC11, IT-5001 is approximately ten times less harmful to stratospheric ozone and is therefore recognized as a viable solution allowing the rapid phase-out of CFCs. Although IT-5001 is the only available “near drop-in” alternative, it is not a direct substitute as IT-5001 is a more polar molecule than CFC11

Request
Callback

Additional Information:

• Item Code: IT-5001

Product Details:

IT-5003 concentrated solution is a biodegradable, phosphate and caustic free cleaner formulated for heavy-duty industrial use. It has superior wetting capabilities and free rinsing properties of IT-5003 solution combine to provide an exceptional cleaner for removing difficult soils and contaminants.

IT-5003 solution readily removes grease, oils, waxes and particulates from automotive, aircraft, and similar mechanical components; removes oils and drawing compounds from stampings; cleans shop oils, greases, and similar soils from components prior to secondary finishing operations including painting, plating, application of various electrostatic spray coatings; and removes grease, oils, and light carbon deposits from stampings, turnings, and similar components used in every sector of industry.

IT-5003 solution can be safely used with most base metals and alloys without pitting or discoloration. It is very soluble in water, methanol, ethanol, acetone, acetic acid, and ethyl acetate. The cleaner is low on corrosivity with negligible volatile organic compounds (VOCs), non-flammability, low odor & low toxic.

Request
Callback

Additional Information:

• Item Code: IT-5003

Product Details:

IT-5004 When changing your molding machine to run a different material and/or switching the color of the mixture, you need a purging compound that will not only remove all traces of the previous mix, including degraded material from the screw and barrel, but accomplish this with as little downtime as possible. IT-5004 liquid purging compound cleans the entire plasticator, mixed with a minimum amount of plasticizing material. It can be used immediately after the molding process to avoid costly delays in production. It will clean not only the pigments and plastic residue from the barrel and screw but, when used without a carrier, is also an excellent polishing medium for removing oxidation from metal. IT-5004 purges barrels and screws, nozzles and hot-runner tooling of extruders and injection molding machines under operating conditions.

Request
Callback

Additional Information:

• Item Code: IT-5004

Product Details:

IT-2589 is a precision cleaner spray for cleaning and degreasing of the metal surfaces. It cleans quickly & effectively & guarantees absolutely clean surfaces. The cleaner evaporates without leaving any residues and is free CFC & CHC’s.

It is an ideal cleaner for de-greasing metal surfaces before surface treatment. Other applications include its use as a cleaning agent for bearings before lubrication, for removing oil, grease and dirt residues from assemblies or as a cleaner during repair jobs, etc.

Request
Callback

Additional Information:

• Item Code: IT-2589

High Performance Cleaner & Degreaser Spray
A precision cleaner spray for cleaning and degreasing of the metal surfaces. It is fast evaporating & does not leave any residues. The product exhibits 100 % cleaning efficiency and is free of chlorinated solvents.

Request
Callback

Additional Information:

• Item Code: IT-1089AD

IT-1089 is a precision cleaner spray for cleaning and degreasing of the metal surfaces. It cleans quickly & effectively & guarantees absolutely clean surfaces.

The cleaner evaporates without leaving any residues and is free CFC & CHC’s. It is an ideal cleaner for de-greasing metal surfaces before surface treatment. Other applications include its use as a cleaning agent for bearings before lubrication, for removing oil, grease and dirt residues from assemblies or as a cleaner during repair jobs, etc.

moq 500 ml Aerosol

Request
Callback

Additional Information:

• Item Code: IT-1089

Fostered with a team of highly experienced professionals, we have been able to manufacture and supply Online Precision Electrical Electronic Cleaner Spray. Formulated in compliance with industry norms at vendors’ end using finest quality chemical compounds with the aid of high tech machinery, the offered spray is highly effective. Specifically used for cleaning electric circuits, this spray is available with us in tight packaging at negligible prices.

Features:

• Highly effective
• High temperature stability
• Pure

Product Description:

Online Precision Electrical Electronic Cleaner Spray Build up of oxide/sulphide and carbon deposits; Circuits need to be isolated prior to cleaning. Cannot use any solvent due to its unknown compatibility with plastics & elastomers.
Solution: Use IT-1100 It is certified on-line cleaner which is safe to use till 440 V. Safe on most of the plastics. Cleans without leaving any residues.

Request
Callback

Product Details:

IT-5002  A high-purity, di-electric, non-chlorinated, odour-less solvent designed for cleaning of electrical & electronic equipment like motors, it exhibits an efficient residue-free cleaning.

 

The cleaner is safe to use for all metals, plastics, varnishes, rubbers etc. Cleaning is done by dip tank, wipe-off or with forced air. It is a slow drying cleaning solvent that cuts into the grease & grime effectively & exhibits enhanced penetration.

Additional Details :
Item Code : 5002 

 

Request
Callback

concentrated solution is a biodegradable, phosphate and caustic free cleaner formulated for heavy-duty industrial use. It has superior wetting capabilities and free rinsing properties of IT-5003 solution combine to provide an exceptional cleaner for removing difficult soils and contaminants.

IT-5003 solution readily removes grease, oils, waxes and particulates from automotive, aircraft, and similar mechanical components; removes oils and drawing compounds from stampings; cleans shop oils, greases, and similar soils from components prior to secondary finishing operations including painting, plating, application of various electrostatic spray coatings; and removes grease, oils, and light carbon deposits from stampings, turnings, and similar components used in every sector of industry.

IT-5003 solution can be safely used with most base metals and alloys without pitting or discoloration. It is very soluble in water, methanol, ethanol, acetone, acetic acid, and ethyl acetate. The cleaner is low on corrosivity with negligible volatile organic compounds (VOCs), non-flammability, low odor& low toxic.

Request
Callback

a high-purity precision liquid is a best available best available replacement to CFC11.

Compared to CFC11, IT-5001 is approximately ten times less harmful to stratospheric ozone and is therefore recognized as a viable solution allowing the rapid phase-out of CFCs. Although

IT-5001 is the only available “near drop-in” alternative, it is not a direct substitute as IT-5001 is a more polar molecule than CFC11.

Request
Callback

Request
Callback

Product Details:

Opteon™ Sion is a high solvency cleaning agent which is non-flammable and a low environmental impact product for cleaning applications. Typical applications for this product include degreasing, precision cleaning, defluxing, silicone removal, and general solvent cleaning.Opteon™ Sion represents a safe alternative to chlorinated solvents such as HCFC-225, 141b, TCE and nPB, which are currently being phased out due to health and environmental risks.

The safe exposure limit for nPB has been measured at 5-10 ppm – industry authorities even recommend further reducing to 0.1 ppm – whereas Opteon™ Sion has a safe exposure limit of 201 ppm, which is comparable to everyday rubbing alcohol.

Performance:
The cleaning power of Opteon™ Sion has been measured up to a 100 KB value, which is a cleaning power standard. Opteon™ Sion can match nPB and other common formulations ounce for ounce, providing all their solvency benefits, while offering a superior toxicity profile.

Maintenance:
While Opteon™ Sion is a safe, effective, and environmentally friendly nPB replacement, nPB requires acid acceptance testing, stabilizer maintenance, and solvent air monitoring for safe and effective use. These additional formulations and processes increase your overall cost of using nPB – making Opteon™ Sion an even better, safer value.

Benefits:

• Designed to clean a wide range of soils
• Fast, residue-free drying; offers viscosity to clean oil and grease from small parts, leaving no residue
• Compatible with a broad range of metals, plastics, and elastomers
• Chemically and thermally stable
• Zero ODP and low GWP (< 15 GWP)
• Recyclable and reusable
• Low surface tensions
• Non-flammable
• Allows for the continued use of existing equipment (no or minimal equipment upgrade necessary)
• Easy to handle, easy to store
• Available in multiple package sizes

Physical Properties:

Request
Callback

Request
Callback

Request
Callback

Request
Callback